BOVINE BEACON®
Premium Day and Night Standing Heat Indicator
- "Glows" for day and night heat detection.
- Easy to see under all lighting conditions.
- Effective in all temperatures.
- Large surface area with plastic holding tab
for no-mess application.
- Covered with non-toxic, bitter solution that
deters licking and increases retention.
- Area to write down animal's identification.
Looking for the most reliable way to catch your cows in heat?
The BOVINE BEACON is the easy answer. This premium standing
heat indicator provides a highly visible solution to day and
night heat detection. When pressure is exerted on this hi-tech
patch, two substances mix to produce a vivid color that
"glows", allowing for accurate heat detection, day or night.
You'll save time observing animals for heat, get more bred,
and have a more profitable reproduction program with
BOVINE BEACON.
Designed by Dairy Producers, tested by Dairy Producers,
endorsed by Dairy Producers!
"The BOVINE BEACON is designed for all dairies, large and
small, and will adapt easily to most management plans.
I believe the BOVINE BEACON can make the dairy industry
a more profitable business by detecting more heats,
lowering conception ratios and increasing the productive
life of cows."
Kevin Herriott,
Dairy Farmer and Creator of the
BOVINE BEACON, Meridan, Idaho
How to use the BOVINE BEACON
Follow these few simple steps to ensure proper operation
of the BOVINE BEACON.
![[Application Location]](images/location.gif) Fig. 1: Placement |
![[Tab Location]](images/tab_loc.gif) Fig. 2: Tab Location |
![[Glue Beads Location]](images/glue_loc.gif) Fig. 3: Glue Beads |
-
The BOVINE BEACON is designed to be applied directly over the cow's backbone between the hip and pin bones (See Figure 1 above). Examine this location on the cow. If necessary, curry the area to remove dirt and loose hair. Under wet or rainy conditions, dry the area before applying the BOVINE BEACON.
-
Locate and grip the TAB (Figure 2 above).
-
Turn the BOVINE BEACON upside down, and apply beads of glue to the cloth as shown in Figure 3 above. Each BOVINE BEACON is packaged with a glue applicator. Use only the glue that is provided with the BOVINE BEACON.
-
Place the BOVINE BEACON, glue-side down, on the backbone, between the hip and pin bones with the tab facing the tail.
-
Press down on the cloth edges of the BOVINE BEACON to work the glue into the hair.
That's all there is to it!
Visually inspect each cow that has a BOVINE BEACON twice a day
at 12 hour intervals, or more often if possible. The BOVINE BEACON will activate after only one riding.
Note: To reduce false activations with the BOVINE BEACON Standing Heat Indicator, prevent cow contact with low hanging branches, back scratchers, cattle oilers, etc. Also use care with "can't kick" devices to avoid false activation.
®BOVINE BEACON is a trademark of Omniglow Corp., W. Springfield, MA
For more on availability of this product outside of the U.S.A., contact: www.bovinebeacon.com
|